Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 11-10-2020, 05:46 PM
Graham's Avatar
Registered User
 
Join Date: Nov 2004
Location: Ontario, Canada
Posts: 4,393
Pickle Fork Size

Anyone know what size of pickle fork I may need to remove tie rods from 72 107 and 85 300D?

Our local outlet shows 11/16", 21/32" and 15/16" . Those would be 17.5mm, 16.67mm and 23.8mm.

__________________
Graham
85 300D,72 350SL, 98 E320, Outback 2.5
Reply With Quote
  #2  
Old 11-10-2020, 06:19 PM
Registered User
 
Join Date: Sep 2001
Posts: 2,764
I don't know the answer to your question; but, I've used scissor type tie rod separators from auto part store loaner programs with better results than pickle forks. The scissor type do not do any damage to the boots.

Good luck!!!
__________________
"Rudeness is a weak man's imitation of strength" - Eric Hoffer
Reply With Quote
  #3  
Old 11-10-2020, 06:59 PM
Graham's Avatar
Registered User
 
Join Date: Nov 2004
Location: Ontario, Canada
Posts: 4,393
Quote:
Originally Posted by Sugar Bear View Post
I don't know the answer to your question; but, I've used scissor type tie rod separators from auto part store loaner programs with better results than pickle forks. The scissor type do not do any damage to the boots.

Good luck!!!
I am not worried about damaging the 30+ year old boots

With Covid, our stores up here are not loaning tools. I would have to buy the scissor type and it is a bit costly for a 1-off job.

I may be ale to remove the tie-rods with just a hammer, but a pickle fork would be less likely to damage other parts.

If I don't get an answer here, I will have to crawl under car in morning before heading out to buy the fork!
__________________
Graham
85 300D,72 350SL, 98 E320, Outback 2.5
Reply With Quote
  #4  
Old 11-11-2020, 09:06 AM
Registered User
 
Join Date: Feb 2008
Location: Madeira Beach, FL
Posts: 57
I would go to harbor freight and purchase their ball joint separator. Inexpensive and works like a boss.

Sent from my SM-A515U using Tapatalk
Reply With Quote
  #5  
Old 11-11-2020, 09:12 AM
Graham's Avatar
Registered User
 
Join Date: Nov 2004
Location: Ontario, Canada
Posts: 4,393
Quote:
Originally Posted by Jayare View Post
I would go to harbor freight and purchase their ball joint separator. Inexpensive and works like a boss.
No HF in Canada. We have PA. Similar tool costs $50. Pickle Fork $8. For a one time job, it will have to be fork and/or hammer
__________________
Graham
85 300D,72 350SL, 98 E320, Outback 2.5
Reply With Quote
  #6  
Old 11-11-2020, 10:02 AM
Registered User
 
Join Date: Feb 2020
Location: Texas USA
Posts: 241
I bought a forked one for a mustang job decades ago

it almost an inch between the forks

i did not know they made different sizes

worked for a triumph spitfire

worked for a 560 SEC

I plan on using it when I get to my 300d front end work
Reply With Quote
  #7  
Old 11-11-2020, 10:04 AM
Diseasel300's Avatar
Registered User
 
Join Date: May 2016
Posts: 6,025
I use an old Lisle pickle fork on my cars to change the tie rod ends. No idea what size it is supposed to be, but the opening at the narrow end of the forks is 23mm and tapers down to 19mm towards the shaft. I can't imagine ever using anything smaller for any application.
Reply With Quote
  #8  
Old 11-11-2020, 10:23 AM
Graham's Avatar
Registered User
 
Join Date: Nov 2004
Location: Ontario, Canada
Posts: 4,393
Quote:
Originally Posted by Diseasel300 View Post
I use an old Lisle pickle fork on my cars to change the tie rod ends. No idea what size it is supposed to be, but the opening at the narrow end of the forks is 23mm and tapers down to 19mm towards the shaft. I can't imagine ever using anything smaller for any application.
Thanks guys for the info. There is a 15/16" fork. Maybe I will get one of those. Others say I should get the scissor type joint separator. But for my one-off job thought I would try the pickle fork.
__________________
Graham
85 300D,72 350SL, 98 E320, Outback 2.5
Reply With Quote
  #9  
Old 11-11-2020, 08:48 PM
Graham's Avatar
Registered User
 
Join Date: Nov 2004
Location: Ontario, Canada
Posts: 4,393
Quote:
Originally Posted by Jayare View Post
I would go to harbor freight and purchase their ball joint separator. Inexpensive and works like a boss.

Sent from my SM-A515U using Tapatalk
I went out today to buy a pickle fork. But store was closed because of Remembrance Day.

So I went to a different store. I asked the guy behind the counter where I could find ball joint tools. He said - to Buy or Rent? Their loan-a-tool program was supposed to be closed for Covid. But they were doing it again, so I got a good ball joint separator on loan.

First outer joint popped right off. Inner wouldn't budge. I thought I was going to break the tool. I tried tapping with idler arm hammer, but still no dice. Then got out my small butane torch and applied heat. Eventually released with a bang!

Other side and new tie-rods tomorrow.

__________________
Graham
85 300D,72 350SL, 98 E320, Outback 2.5
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 03:49 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page