|
|
|
#1
|
|||
|
|||
190e 2.3 chain tensioner stuck in block
Hi All,
I have a 1992 190e 2.3 with the m102 engine with a leaking head gasket. I've torn the motor down to remove the head but I am struggling with the chain tensioner. -Do I need to fully remove the chain tensioner housing to "reset" the ratcheting mechanism? -I tried to unscrew the tensioner housing (after removing the spring and cap) with a 17mm allen socket but it is very stuck. I used a big breaker bar and the threads in the tensioner are starting to strip. Does the tensioner HAVE to fully come out and be reset? Will a torch melt the chain guides inside the motor? Any suggestions? Please note this tensioner is NOT the same as found on the 6 cylinder 190e 2.6 Photos below https://drive.google.com/file/d/1kfqjtleqcpPrLFYBGfGWA0PihRB7pogL/view?usp=sharing https://drive.google.com/file/d/1VQGI4Hx- GIKxmnSwlTLnO7FXr3BNEyej/view?usp=sharing https://drive.google.com/file/d/1IAf6M3USSCLd43qGkm1r-wMpeOl9TLxI/view?usp=sharing https://drive.google.com/file/d/1xn-wV9A_cvrm_Bgx86j0rj6wEPL6Ejnf/view?usp=sharing Please let me know if anyone has does this before. Thanks, Nate |
Bookmarks |
|
|