|
|
|
#1
|
|||
|
|||
W211 passenger seat will not move fully back or fully incline
The passenger seat will not move fully back or fully incline. It is about half of what it should be in both situation. It can move back or incline but stop halfway thinking it has reached the end limit positions. The door switch should be ok as all directions can be activated. I suspect the calibration of the end positions are out of whack. I removed the passenger seat fuse at the dash but to no avail. There is another fuse in the trunk but I hesitate to remove it. I don't know what they do. Do I need to take it to the dealer?
__________________
Not MBZ nor A/C trained professional but a die-hard DIY and green engineer. Use the info at your own peril. Picked up 2 Infractions because of disagreements. NOW reversed. W124 Keyless remote, PM for details. http://www.peachparts.com/shopforum/mercedes-used-parts-sale-wanted/334620-fs-w124-chasis-keyless-remote-%2450-shipped.html 1 X 2006 CDI 1 x 87 300SDL 1 x 87 300D 1 x 87 300TDT wagon 1 x 83 300D 1 x 84 190D ( 5 sp ) - All R134 converted + keyless entry. |
#2
|
|||
|
|||
The car fixed itself! After a few days, the seat is back to normal again. The fault seems to have timeout. It can now move fully back or recline. Very strange, too many computers with modern car.
__________________
Not MBZ nor A/C trained professional but a die-hard DIY and green engineer. Use the info at your own peril. Picked up 2 Infractions because of disagreements. NOW reversed. W124 Keyless remote, PM for details. http://www.peachparts.com/shopforum/mercedes-used-parts-sale-wanted/334620-fs-w124-chasis-keyless-remote-%2450-shipped.html 1 X 2006 CDI 1 x 87 300SDL 1 x 87 300D 1 x 87 300TDT wagon 1 x 83 300D 1 x 84 190D ( 5 sp ) - All R134 converted + keyless entry. |
Bookmarks |
|
|