PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   Replacing tie rods (http://www.peachparts.com/shopforum/tech-help/41247-replacing-tie-rods.html)

420benz 06-30-2002 09:10 PM

Replacing tie rods
 
I have a small hydrolic jack and two jack stands,where is the best place to put the jack stands to get the front end completly off the ground safely? [89 420sel] Is it a good idia to remove both front wheels?

drbrandini 06-30-2002 10:18 PM

420,

Jack the car up by the factory jacking points just behind the front wheels. Get the car safely on the jack stands to secure the vehicle since you will likely have to do some hammering to remove the old tie rods. Removing the wheels is not necessary, but may help in accessability.

Good luck,

420benz 07-01-2002 12:01 PM

THANKS DRBRANDINI I WILL DO THIS JOB NEXT WEEK .


All times are GMT -4. The time now is 02:12 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website