93 300E 2.8 water pump replacement
I did the searches and read benzmacs posts and the many other posts and saw the snap on tool i need
Question i have ,some have stated that all i need to do is remove the tensioner shock to get access to that lf bottom bolt remove the hoses and sensor wires , and looking at this it seems true , i have a solid steel tube that runs across the front of the head which connects to a rubber hose to the tank (may be mistaken to where this goes) How is that tube removed or does it come out with the pump I am posting this because i am thinking that the 93 2.8 is a bit different than the earlier years that i have read instructions on.and the manuals i have looked at so far are general in nature that they are for 85-95 , i really need to get my hands on the actual shop manual for this year and model. any help appreciated on someone that has done this on a 93 and up 300e thanks and sorry for the repost |
More info
chassis # 124.028 motor # 104.942 thats why im thinking different than the 103's |
Held into pump housing with allen screw and clamp. Also screwed to the front cover. Should be removed before pump removal. Heater hose.
|
All times are GMT -4. The time now is 09:55 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website