|
|
|
#1
|
|||
|
|||
Trans Control Module 06 E350AWD
Hi All,
I checked here and in my WSM but found little to help me locate the Trans Control Module without finding the right place, I lowered the kick panel in the passenger footwell but there was only a light bulb. I was hoping to find a small black box about 3"x3"x1/2, maybe a little smaller. Anyone have another location? TIA - |
#2
|
|||
|
|||
I only know that on the 129 its located under the carpeting on the passenger side of the center console.
__________________
To see my 129 parts for sale visit: http://stores.ebay.com/The-Mercedes-SL-Store John Roncallo |
#3
|
|||
|
|||
Trans Control Module 06 E350AWD
Thanks for the suggestion - I'll dig around in the area you had luck in.
Hopefully I'll find it! It's getting old seeing that gorgeous MB sitting in the driveway mocking me. Larry |
#4
|
|||
|
|||
Quote:
|
#5
|
|||
|
|||
TCM 06 E350
Quote:
The only Trans code I get is "P0715 INPUT/TURBINE SPEED SENSOR A CIRCUIT MALFUNCTION". I am getting some cam related issues but I am fully knowledgeable about that. It's the P0715 came back after I cleared it following the Cond Plate R&R. I have the Beckman procedure to clear all of the codes in ll the Modules. it has 2 options - by using the battery (disconnect the - cable, etc and #2 involves the ign switch & accel pedal.) I may even do both just o be sssssssssssssssssssssssssssssssssssss |
#6
|
|||
|
|||
Trans Control Module 06 - Need Location.
Quote:
"P0715 INPUT/TURBINE SPEED SENSOR A CIRCUIT MALFUNCTION". I am getting some cam related issues but I am fully knowledgeable about that. It's the P0715 that came back after I cleared it following the Cond Plate R&R. BTW, I just came across a Beckman procedure to clear all of the codes in the Modules. it has 2 options - by using the battery (disconnect the - cable, etc and #2 involves the ign switch & accel pedal.) I may even do both just to have all bases covered. It was buried deeep in the computer but I believe it's still valid. I am at the point that I have done the other possible problem areas and still have the problem (not upshifting) so when I can get the part # from the TCM (as soon as I can find the darn thing) I will get a new one. Not sure if I will try a used one 1st - you never know with electr stuff. But I can try resetting the codes using the Beckman method. I will search my WSM - perhaps it's in there somewhere.... There's oe other problem it has that may or may not be related. It has a Battery Warning in the dash screen. I have replaced both batteries, the alternator and cycled the windows, sunroof etc but the warning stays. I can't see how it would relate to the shift problem but I don't know. So there you have the whole lurid story. I am getting pretty frustrated. I'll take any help you care to offer? Thanks for the reply! Larry |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|