|
|
|
#1
|
||||
|
||||
m103 cap and rotor question
Here is the question. Is there anything that can cause the number 2 and 5 cylinders (180 degrees apart on cap) to not fire besides a bad cap/rotor? The wires are good as I tested them in the firing cylinders. Im not even talking about fuel problems etc becasue there is no spark at those 2 cylinders. Maybe crank position sensor or EZL? The engine is used so I dont know if it was doing it before and the cap and rotor do show some wear. Thanks.
|
#2
|
||||
|
||||
One thing to check is the rotor bracket, the metal part that the rotor attaches to. Make sure it hasn't cracked.
Gilly
__________________
Click here to see the items I have up for auction at EBay Click here to see a photo album of my '62 Sprite Project Moneypit (Now Sold) |
Bookmarks |
|
|