blower on 190E
I have 1991 190E 2.6 and blower motor doesn't work in system. If I put battery leads on it, it works fine. Any suggestions? No voltage to the motor. TIA
|
DO YOU VOLTAGE TO & FROM THE BLOWER REGULATOR?
|
Yes, I have voltage at the switch. There's a ground, 12 volts, and the switch is adding other wires with 12 volts as it steps up the current to the blower. I checked it with a VOM. There are two relays inside the switch, also and at least one activates when I throw current to it. Could the resister pile behind the battery be faulty? A Mercedes mechanic said he has NEVER had one of those go bad. The blower motor runs great with a battery positive put to it using the ground supplied by the wiring. Thanks, Ernie in Louisville
|
Thanks WRM
Thanks for the reply. The problem was the bottom plug going into the resister array for the blower was unplugged! What a hassle. It's fixed.
|
All times are GMT -4. The time now is 10:14 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website