|
|
|
#1
|
|||
|
|||
Technical Data for M103 engine needed
I am trying to decide whether to buy standard or undersized main and connecting rod bearings. I have the clearances measured off of my crank but I do not know the specifications of the bearings. Can anyone help me out with this information?
__________________
George Carstens |
#2
|
|||
|
|||
Unless you plan on turning the crank, use standard bearings. Have you mic'ed and found the journals in spec?
I have the dimensions at home if you need to know the original journal size. Good luck, |
#3
|
|||
|
|||
The main bearing journals were about 2.3065" and the rod bearings were about 1.8875". Should I still go with the standard bearings? The engine had a 104,000 miles on it.
__________________
George Carstens |
Bookmarks |
|
|