|
|
|
#1
|
|||
|
|||
I would like to know how to take off the wooden plate arround the gear knob as I want to readjust the window buttons and change the gear knob too... I nearly broke the plate while tying to pull it off with a screw driver at its rear
|
#2
|
|||
|
|||
Take out the ash tray and the coin pocket and then slide the wood forward. Before you do this take off the small black ring around the selector light (P,R,N,D,2,1) then it will come off easily.
------------------ Benzmac: ASE CERTIFIED MASTER AUTO TECHNICIAN LEAD TECHNICIAN FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
#3
|
|||
|
|||
First of all thx for your quick reply. I'll do this later. I don't have the coin pocket as I have the "Siberian" heater commands there I don't think that would make a difference...
Thx again ------------------ ------------------------------------- WEB Site : http://www.adamou.dpn.ch A.S.C. 1999 ------------------------------------- |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Looking for a R209 2003 sl500 wood gear shift knob | epicure3 | Site Feedback | 0 | 03-26-2004 12:23 PM |
83 240D Manual Trans rebuild--I finished it, but something is wierd about 3 rd Gear.. | Carrameow | Diesel Discussion | 9 | 02-13-2004 12:56 PM |
83 240D Manual Trans rebuild--I finished it, but something is wierd about 3 rd Gear.. | Carrameow | Tech Help | 4 | 12-30-2003 12:40 AM |
Flare during gear change | engatwork | Tech Help | 8 | 12-03-2000 05:57 PM |
auto shifter knob change on s420 | cbernabe | Tech Help | 2 | 07-14-2000 02:25 PM |