Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 07-16-2002, 05:49 PM
Loves his wagon
Join Date: Dec 2001
Location: Scott, Illinois
Posts: 34
retro fit kit for a/c compressor

I replaced my a/c compressor in my 85 300 TD. I purchased a new R-4 compressor and rec. dry. The instructions for the retrofit kit on the new compressor were inadequate. It showed every configuration for the mainfold except the stepped ports. I called the guy who sold it to me and he told me to use the yellow (or large brass seal) for the suction and the green one for the discharge. I did exactly that and there is a leak at that green seal (discharge side). Someone else said to use the shorter of the to sleeves in the kit with the green seal. Has anyone done this before? If you have I could use some guidance. Thanks.
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 08:10 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page