500se
Hi
I'm a owner of a 1991 500SE 126. No problem starting in the morning, however when you try starting it for the second time it wont start. The engine is turning but it wont start. If you leave it for about five minutes it will start immediately. This is very annoying when you quickly want to stop somewhere and have to switch off the engine. If it doesn't start the first time you have to wait 5 minutes. Any ideas? Thanx Danie Eloff |
Fuel pump relay would be my first guess. Since you state "If it doesn't start the first time you have to wait 5 minutes" which sounds to me like it tried to start just didn't. It is firing off what little fuel pressure is left. The relay is located right of the brake booster and will have 8ZYL with an RPM limit (5900?) printed on the top of it. If you open it up you may find broken sloder joints and simply resoldering them might fix it. Once a gain just a guess.
fasthair |
All times are GMT -4. The time now is 07:48 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website