|
|
|
#1
|
|||
|
|||
Failure mode of the air flow sensor?
Can someone who has replaced or repaired (??) an air flow meter explain the symptoms of a bad one?
I realize that the meter itself (on an late 80`s car) send a 0.6 to approximately 5.0 volt signal to the EFI computer when everything is working correctly. I assume they fail by developing open circuits? I realize that the meter portion is not extremely exact. How could it be adjusted other than the resting level and the centering of the air flow plate? Tinker |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|