|
|
|
|
|
#1
07-25-2002, 04:42 PM
|
|||
|
|||
|
cruise inop
I have a 95 e320 with about 80K miles on it. The cruise works only for a few minutes before dropping speed. I'm assuming a vacum leak?
|
|
#2
07-25-2002, 05:45 PM
|
|||
|
|||
|
Cruise control on that car is 100% electronic. With MB scanner the control unit can be tested for operation.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator
|
|
#3
07-25-2002, 05:49 PM
|
|||
|
|||
|
Where is the control module located? I can at least check the connections...... before I take it to get scanned...
|
|
#4
07-25-2002, 06:04 PM
|
|||
|
|||
|
You could check the fuses. MB fuses/ notoriously corrode at the terminals (on the fuse or the fusebox connections). I didn't believe it either, and my fuses all looked fine, but ancillaries like wipers started randomly stopping and starting, and this was the problem.
Cleaning the connections is a good way to reduce any future worries. later
__________________
190E's: 2.5-16v 1990 90,000m Astral Silver 2.0E 8v 1986 107,000m Black 2nd owner http://www.maylane.demon.co.uk/190esmall.jpghttp://www.maylane.demon.co.uk/190esmall2.jpg
|
 |
| Bookmarks |
|
|
Linear Mode
