Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 07-27-2002, 01:50 PM
M D Nugent
Posts: n/a
Question Transmission swap info needed

Can a 722.323 (4-spd AT) transmission from a '86 560SEL be used with a '72 4.5 engine (in a '72 car)?

The '72 4.5 engine is a 117.982; the '86 5.6 engine (that came with the trans) was a 117.968. Same engine family, at least.

I don't know if the bellhousing bolt pattern, input splines, and output flange of the two transmissions are the same or not. The shifter assemblies are different and the odo/speedo sender types are different, but I can see ways around those issues.

Just in case a simple bolt-up isn't possible, how could that trans be "adapted" to work with the 4.5?

M D Nugent
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 10:00 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page