560sl badge-tech help please
Please help! My MB badge was stolen off the hood of my 560sl. I bought another through parts place on this site.
My question is.. How do I attach the badge to the hood? There are two holes on the hood where it appears to go but there is nothing holding the badge down? I called the local MB dealer and they said that there wasn't a bolt or anthing but to set the badge down in the holes and it should be secure..Well its not. I feel that there should be something else.. Tech's please help. Thanks, rob |
Use some 3M SUPER WEATHRRSTRIP ADHEASIVE, or 3M PLASTIC & EMBLEM ADHEASIVE.
Bill |
Thanks..Should i put the adhesive right on the hood..it seems that if I put anthing it should go in the holes-is that what you mean..put the weather strip in the holes then the badge in?
|
There should be a small rubber gromet that plugs into one of the holes and the emblem should plug into the gromet. I have had mine off several times for waxing...
|
Jerry,
Thanks for your message. There are no gromets. Whoever stole my badge also lifted the gromets..where do I find these? Is it a part I can buy at the dealership? or at this parts store? rob |
I would check at a dealer. I can't cost more than $1 or $2.
|
All times are GMT -4. The time now is 10:36 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website