Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 08-03-2002, 07:12 PM
haasman's Avatar
Registered User
 
Join Date: Jun 2001
Location: San Francisco, CA
Posts: 3,097
Here's a good one: 190 rear door problem..

The right rear door on the '98 190E 2.3 will not open from the outside.

OK ... but the inside door latch is broken and will not open it from the inside as well.

Any suggestions? Is it even possible to get the interior door panel off while the door is closes?

Yikes!
__________________
'03 E320 Wagon-Sold
'95 E320 Wagon-Went to Ex
'93 190E 2.6-Wrecked
'91 300E-Went to Ex
'65 911 Coupe (#302580)
Reply With Quote
  #2  
Old 08-03-2002, 08:18 PM
Hou_Screw
Guest
 
Posts: n/a
door problems

I just replaced the back two door panels today and I think you can get your door open while the door is shut, then be able to take the door panel loose. I dont know if you have taken one off but just pop the little plastic piece out by the top part of the handle, which should reveal a screw u can take loose with a 10mm socket. Push the handle aside. Slide the whole black plastic piece forward (towards front seats) and pull the piece towards you while sliding the piece forward. This will unlatch the metal rod that controls the latch. You can pull this rod and your door should open. Take the rest of the panel down when your doors opens. It is just that little phillips screw by the latch that you need access to anyway. If you need the rest of the details let me know.
Reply With Quote
  #3  
Old 08-03-2002, 08:45 PM
haasman's Avatar
Registered User
 
Join Date: Jun 2001
Location: San Francisco, CA
Posts: 3,097
Hey thanks

Thats a good idea. I'll try it.

J
__________________
'03 E320 Wagon-Sold
'95 E320 Wagon-Went to Ex
'93 190E 2.6-Wrecked
'91 300E-Went to Ex
'65 911 Coupe (#302580)
Reply With Quote
  #4  
Old 08-03-2002, 09:29 PM
Hou_Screw
Guest
 
Posts: n/a
just thinking...

I'm thinking that after you unscrew the handle, if you look in there, the door latch rod probably is not even hooked into the handle and that is one of the reasons your door doesnt work... let me know..I'm curious now!
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 02:44 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page