Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 08-10-2002, 03:35 PM
Posts: n/a
drive belt

i am the owner of a '90 190e with a 2.6 engine. i was replacing the water pump when i noticed a loose drive belt ( 1 inch play) . so thought was good idea to replace tensioner at the same time. however upon completion all was the same ( 1 inch play ). any ideas as to the problem. note: i found 88 & 89 manufactor dates on pump and tensioner. so i also bought shorter 89 belt but seems to short. thanx.
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 02:16 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page