|
|
|
#1
|
|||
|
|||
Hello,
Trying to rebuild the a/c system on my 81 300sd. I already have a new expansion valve, receiver dryer, A/C compressor. Is there anything else I'm missing to make it in working order? Where is the expansion valve located? Is it easy to replace? thanks |
#2
|
|||
|
|||
The expansion valve on a 126 is one of the most difficult to replace...It is located under the dash behind and above the accelerator pedal. If you are not very careful, you can damage the evaperator when changing the valve because it is directly connected to it.
If you are replacing so many other things, be sure to get new swithces for the drier. they usually fail soon after a repair. ------------------ Benzmac: ASE CERTIFIED MASTER AUTO TECHNICIAN LEAD TECHNICIAN FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
#3
|
|||
|
|||
Thanks for the response...
How many switches needed for the receiver dryer? GP |
#4
|
|||
|
|||
GP
there are only two switchs at drier. one is low pressure switch(black) one is aux fan switch(red) I will pay someone to do it,it's not a fun DIY job.....it could hurt your back and neck been a thch for many many years I still hate to replace expension valve if you don't have the right tools.......I only can tell you.... GOOD LUCK !!! ------------------ MB STARS Master Guild Technician,12 years MB tech 5 years independent shop owner |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
A/C system evacuation | pmizell | Tech Help | 8 | 03-07-2004 11:24 PM |
Too much oil in A/C system? | Box-a-rox | Diesel Discussion | 22 | 08-22-2003 01:35 PM |
300sd a/c problem | drew3395 | Diesel Discussion | 1 | 06-16-2002 11:04 PM |
83 300SD a/c system leak | alwong | Tech Help | 1 | 10-16-1999 10:01 PM |
A/C System Oil | CafcoTX | Tech Help | 3 | 06-19-1999 10:40 PM |