Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #16  
Old 08-20-2002, 03:53 PM
Registered User
 
Join Date: Aug 2001
Location: secret
Posts: 3,044
Sears just replaced a 1/2 " drive rachet that I bought in 1974. Snap On replaced a 3/8" rachet that my Dad bought in 1952 when he bought his tool chest and tools on the famous Snap On weekly pay plan. If I live long enough, those tools will be mine someday, but I hope that's a long time away.

Reply With Quote
  #17  
Old 08-20-2002, 05:01 PM
Registered User
 
Join Date: Apr 2002
Posts: 3,473
mb doc, what battery impact gun do you have? I looked at a hitachi, but it couldnt loosen my lug bolts, so I didnt want it.

Those fold out boxes are copies of the really old hazet boxes. My uncle has like 3 of the old blue hazet ones. You can buy red ones from Snapon UT22, they are like 75 dollars I think. They are the same as griots garage.

One of my friends loves mac ratches, and I can see why, it takes a lot longer for them to give way, but I like how the snapon ones feel and perform. I have all snapon ratchets, and I have quite a bit of snapon extentions. I have noticed that craftsman quality has gone down the drain reciently...I brake craftsman sockets everytime I work on a benz, usually I break them loosening the nuts and bolts. I just use my dads snapon sockets usually because they have tighter tolerances and they dont round off bolts as easy as craftsman and other ones.

Right now I am thinking about getting a snapon impact gun, but I hear that those are made crappy like CP tools, and my friend said to get an IR gun because those are the best. Maybe someone has some advise?

I have mercedes specialty tools including some hazet tools. I am going to get a Klann spring compressor pretty soon.

I think that snapon has the best screwdrivers and wrenches because they fit my hands the best, and I like their extentions because you can put so much force on them before they even deflect, I love my snapon 3/8 breaker bar, its so strong.

Snap on and Mac are very close in their tools, I think that mac ratchets and air tools are slightly better than snapon, but the Mac guy is a jerk, and the snapon guy is really nice to me, so I buy snapon tools because its more convienent. The mac guy lives about 10 blocks from my house, and the snapon guy lives two blocks, and he says I can come over on the weekends if I need to get something immediately.

My dad just got a Facom ratchet, its really nice, it has super fine teeth. I think its a must for every tool box.

I have a full line of gear wrenches. I really like them especially for working on the belt drive systems on the 617 diesel motor, they get into a lot of places that most things cant get to. Anyway, I have been collecting tools since I was 3 so that is why I have so many of them in the 16 years of collection.

http://www.samstagsales.com/
http://www.baumtools.com
http://www.technictool.com/mercedes.htm

I just got a 166C hazet box from samstagsales
__________________
Current Stable:
1994 S500 v140, 210k miles, white with grey.

Former Mercedes in the Stable:
1983 300CD Turbo diesel 515k mi sold (rumor has it, that it has 750k miles on it now)
1984 300CD Turbo Diesel 150 k mi sold
1982 300D Turbo Diesel 225 sold
1987 300D Turbo Diesel 255k mi sold
1988 300 CE AMG Hammer 15k mi sold
1986 "300E" Amg Hammer 88k mi sold (it was really a 200, not even an E (124.020)
1992 500E 156k mi sold
etc.
Reply With Quote
  #18  
Old 08-20-2002, 09:26 PM
1992300e
Guest
 
Posts: n/a
Craftsman quality

I agree with the statement regarding craftsman quality slipping. I've personally purchased and used craftsman for over 20 years and can tell the difference. I am not a mechanic by trade, but if I was I probably would not be able to use craftsman, first because of the lack of specialty mechanics tools and second because of quality issues and breakage.

If I had the money and need I would love to get my hands on some snapon and mac tools. they definately look like good tools. I heard that snapon is going to start having stores. That would probably make it a little easier for me to find the tools.

There is a guy with a truck near my house maybe I'll stop in one day and take a look at his stuff.

My Craftsman open ended box wrenches are junk, spread real easy.

Joel
PS> I am accepting any tool donations, I'll give them a good home.
Reply With Quote
  #19  
Old 08-20-2002, 09:40 PM
Southern's Avatar
Registered User
 
Join Date: Jan 2000
Location: Carol Stream, Il, USA
Posts: 605
I have mostly Craftsman tools due to the price and guarantee. If I used tools everyday I would invest in better quality tools. My 1/4" socket set is S-K that my dad gave me 20 years ago. I almost never use my Craftsman 1/4" socket set after using the S-K - its like the difference between driving a Chevy vs. a Mercedes.

My breaker bar is an S-K and my 1/2" torque wrench is a Sears digitorque.

I was trying to justify purchasing air tools but after borrowing a 1/2" air impact wrench that couldn't break my crankshaft bolt loose, I could no longer justify it.
__________________
Ray
1998 Mercedes E320, 200K Miles
2001 Acura 3.2TL, 178K Miles
1992 Chevy Astro, 205K Miles
Reply With Quote
  #20  
Old 08-21-2002, 12:02 AM
Registered User
 
Join Date: Apr 2002
Posts: 3,473
At homedepot when I was a kid and their husky line just came out, they had this coffin that said RIP on it, and their deal was, bring in your snapon, mac, pretty much any good tool brand, and they would give you a husky one. I asked, hey can I buy all those tools off of you.. They said no, I was just going to trade them into the snapon man and get all new ones =). Too bad people are so stupid, they throw away their old man's tools.

I think that SK tools are better than craftsman. My dad has had SK tools for like 30 years, and they still work. I think in order it goes like this snapon, mac, blackhawk, SK, Craftsman, husky, then checker brand....lol. Hazet, Stahlwhille, and all those specialty brands are about the same.

edit- stahlwhille
__________________
Current Stable:
1994 S500 v140, 210k miles, white with grey.

Former Mercedes in the Stable:
1983 300CD Turbo diesel 515k mi sold (rumor has it, that it has 750k miles on it now)
1984 300CD Turbo Diesel 150 k mi sold
1982 300D Turbo Diesel 225 sold
1987 300D Turbo Diesel 255k mi sold
1988 300 CE AMG Hammer 15k mi sold
1986 "300E" Amg Hammer 88k mi sold (it was really a 200, not even an E (124.020)
1992 500E 156k mi sold
etc.

Last edited by omegabenz; 08-21-2002 at 01:47 PM.
Reply With Quote
  #21  
Old 08-21-2002, 07:42 AM
LarryBible
Guest
 
Posts: n/a
omegabenz,

My jaw is absolutely lying on the floor! I can't imagine ANYONE giving up a snap on tool of any description in any condition for a Husky! I wonder if they really just found some old tools and put in the bucket as a ploy.

Everyone,

My Dad has bought a number of Mac tools beginning right after WWII. They are okay, but I can't imagine anyone preferring a MAC ratchet over a Snap On. I suppose it's a personal preference thing, but to me the MAC is a big, bulky piece of junk compared to a Snap On. The difference to me is like the difference between a Ferrari and a dump truck, the Snap On being the Ferrari.

If they do open a Snap On store in Dallas I will definitely roam around that place like Tim the Toolman Taylor. In fact, I think it would be a good decision to put a bank next door and offer tool loans, most people would need them if they do any business in the store.

Have a great day,
Reply With Quote
  #22  
Old 08-21-2002, 08:42 AM
Registered User
 
Join Date: Jul 2002
Location: Trenton, NJ
Posts: 248
I knew this thread would be an active one and the general concensus that Snap-on is one of the leaders and that for the shade-tree type, Craftsman is okay but declining in quality is also what I expected.

In thinking back I realized I did have one experience with Snap-on tools. Back in the early '90s my first car, a '73 Plymouth, was damaged in an accident when another driver "followed the vehicle in front of him through the intersection" (his quote to the police) and through a stop sign. Fortunately I was able to find a complete front clip in a salvage yard near home and brought this over to the body shop doing the repairs. A month or so later when the work was done and I picked up the car I quickly discovered that the horn didn't work. Remembering that the old horns had worked and figuring that they were still on the damaged pieces at the shop, I went back. "Sure, take what you need out of the junk pile in back. If you need tools, you can use mine." I was told by the owner. Grabbed a Snap-on combo wrench to remove the horn. WOW!! If a Craftsman feels like a good tool in your hand, the Snap-on felt like it WAS part of my hand and I was in direct contact with the bolt.

Since that day I've continued to buy Craftsman due to budget but there is little question, I'll buy all Snap-on the day I win the lottery (of course it helps to buy lottery tickets )

jlc
Reply With Quote
  #23  
Old 08-21-2002, 09:18 AM
Registered User
 
Join Date: Aug 2001
Location: secret
Posts: 3,044
Think about this.....

Professional techs buy their tools.... but their customers pay for them. If I was a pro, people would owe Snap On a LOT of money!!:p :p
Reply With Quote
  #24  
Old 08-21-2002, 11:14 AM
Senior Member
 
Join Date: Jun 2001
Location: Northern Calif. (Fairfield Area)
Posts: 2,225
My roll around has a mixed bag. You can save money on general items like extensions, etc by buying Crapsman. They work just fine. Some of the more specialized like vacuum hose puller offers you can only get from the tool trucks. My sockets are Mac, Snap-on, and Crapsman. I'm only fussy about my wrenches.I have some S/K wrenches which I rate highly considering the price. I have 3 standard length 13mm combo wrenches. The last one I would reach for is the Mac. I think Mac wrenches are clubs. I have no problem with the rest of the Mac line;I just don't like their wrenches.I would reach for my second best wrench next. That would be my snap-on. Snap-on wrenches are very good,but they are thicker than they need to be if the steel were better,and they are too slick to hold onto at times. The first 13mm I would reach for would be my STAHLWILLE. It is very strong and super thin. It also has alot of raised lettering on it for improved grip. Mr. Wille started making tools back around 1850 so he's gotten it right in my opinion. Now here is a question for the professional mechanics. Why is it so easy to leave a Snap-on ratchet in one of the last cars that left the shop,but you never lose a Craftsman ratchet? Trivia question. How did Snap-on get the name?

Peter
__________________
Auto Zentral Ltd.
Reply With Quote
  #25  
Old 08-21-2002, 12:11 PM
LarryBible
Guest
 
Posts: n/a
Trivia answer:

The first Snap On tools were sockets that snapped onto the tool. I don't know if the handle was ratcheted at that point, but I know that the idea was interchangable snap on sockets.


I thought that I had, at one time or another, had my hands on about every brand of combination wrench made, but Stahlewille is not on my list. You now have my curiosity peaked. If they feel any better than a Snap On wrench in your hand I don't think I would be able to stand it.

I agree about the Mac end wrenches, but as I said, I think their ratchets are REALLY crude. I think my Dad must have started buying Mac because of the tool man. When I first got out of the army I worked at a truck shop for a short while before the next college semester started. My Dad was there one day when the Mac man came around. They started talking and my Dad had been buying tools from him since right after WWII, this was 25 years after that. The guy really was an impressive fellow, that probably had a lot to do with why my Dad started buying Mac tools. To him "a wrench is a wrench."

I have no Snap On metric tools, except for a very few hex sockets and such that I got off the Snap On truck for a particular job. Of course I still get to use my Snap On ratchets on anything. If I pick up any other kind of ratchet it feels very awkward in my hand.

Have a great day,

PS, what is the prize for winning the trivia contest?
Reply With Quote
  #26  
Old 08-21-2002, 01:04 PM
Senior Member
 
Join Date: Jun 2001
Location: Northern Calif. (Fairfield Area)
Posts: 2,225
Larry,
You got it right. I'm sorry,but there is no prize other than the satisfaction. According to a famous commentator,here is the rest of the story. A young man was working at a foundry that made mechanic's tools. At the time each socket was attached to the handle. You had to have a breaker,a speed handle, and tee handle in each of the socket sizes. This young man went to management and suggested they make the sockets removable so the mechanic would only have to buy 3 wrenches and change the sockets. Needless to say he got the same horse laugh as the guy that asked a bunch of banks to loan him the money to start a business to put bras on cars. Why would they want to sell less tools? The young man wasn't deterred,and he started making sets on his own. He then went around selling them to mechanics. He couldn't keep up with orders. Interestingly sales at the foundry started to drop off and the rest is history.Many stories like that. Mighty Wurlitzer made a board room decision that there was no need for a couple of extra tunes on their juke boxes.Seeburg disagreed and put them on theirs. Soon after Wurlitzer was gone. Who would ever pay for a rock and try to make a pet out of it?

Peter
__________________
Auto Zentral Ltd.
Reply With Quote
  #27  
Old 08-21-2002, 01:27 PM
Registered User
 
Join Date: Oct 1999
Location: New York City Burbs
Posts: 177
After destroying 2 Craftsman breaker bars in the same day, I promptly spent $80 bucks on a Snap On. My time has indeed become money.

Snap On tools are fantastic, but I like many others cant always afford them. Special applications require them, like Porsche flywheel

I have had good results with some SK Tools, but they are not cheap either.

I have mostly Craftsman but as I break em I replace em with something better and affordable like Husky. Some of the Husky stuff is identical to the top end professional Craftsman.
__________________
Patrick Leber
'84 190E 2.3
'83 Porsche 944 (track car)
'84 Porsche 944 (parts car)
85.5 Porsche 944 (sled)
Reply With Quote
  #28  
Old 08-21-2002, 01:46 PM
Registered User
 
Join Date: Apr 2002
Posts: 3,473
The snapon man by my house has a snapon rachet from the early 1900s, around 1910 I think, where it ratchets only one way, but you have to push the 1/2 square through the ratchet to make it go the other way. That is why I think it was called snapon which is similar to the explination above. 1/2 is standard, that is why snapons part numbers for 1/2 start with S, 3/8 is Ferrel Drive, like FK831, and then 1/4 it TM, tiny midget. No question that snapon is superior, how do you like breaking a breaker bar than smashing your hands up against something sharp, it hurts, thats how I got my 3/8 snapon breaker bar. I think that my snapon torque wrench is far superior to anything i have ever used. I would agree that STAHLWILLE and HAZET are both extremely good, sometimes they are better than snapon especially in their hex drive, and spine drive because they are more compact letting you get to what you are trying to get at, like mercedes starter bolts...
__________________
Current Stable:
1994 S500 v140, 210k miles, white with grey.

Former Mercedes in the Stable:
1983 300CD Turbo diesel 515k mi sold (rumor has it, that it has 750k miles on it now)
1984 300CD Turbo Diesel 150 k mi sold
1982 300D Turbo Diesel 225 sold
1987 300D Turbo Diesel 255k mi sold
1988 300 CE AMG Hammer 15k mi sold
1986 "300E" Amg Hammer 88k mi sold (it was really a 200, not even an E (124.020)
1992 500E 156k mi sold
etc.
Reply With Quote
  #29  
Old 08-21-2002, 04:07 PM
Registered User
 
Join Date: Apr 2002
Posts: 3,473
snapon has an online store now, go to www.snapon.com I wonder if you have to pay taxes on the orders because they do have presence in every state. Does anyone know?
__________________
Current Stable:
1994 S500 v140, 210k miles, white with grey.

Former Mercedes in the Stable:
1983 300CD Turbo diesel 515k mi sold (rumor has it, that it has 750k miles on it now)
1984 300CD Turbo Diesel 150 k mi sold
1982 300D Turbo Diesel 225 sold
1987 300D Turbo Diesel 255k mi sold
1988 300 CE AMG Hammer 15k mi sold
1986 "300E" Amg Hammer 88k mi sold (it was really a 200, not even an E (124.020)
1992 500E 156k mi sold
etc.
Reply With Quote
  #30  
Old 08-21-2002, 05:23 PM
Senior Member
 
Join Date: Jun 2001
Location: Northern Calif. (Fairfield Area)
Posts: 2,225
Austin,

A tip on MB starter bolts. You get the two feet some odd inches extension from Snap-On that is 1/2 inch drive on the breaker bar end and 3/8 inch on the socket end. Use a wobbly 19mm or 10mm allen depending on model car and enter near the tranny tailshaft. It makes the job fairly easy. This extension gives you the muscle on the breaker bar end with minumum flex and nimbleness on the socket end.

Peter

__________________
Auto Zentral Ltd.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 03:22 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page