300se blower regulator
I just purchased this porcupine part and have no idea where it is located on the vehicle - anyone have any idea? I could not find it in the CD.
Thanks |
Hi,
On my 1987 260E it is underneath the blower motor which is under the wiper arm. Quite a bit of work to reach it. I found the description on the CD. Dont know if this will help. Saumil |
ON the 1988 thru 1991 W126 chassis it is mounted inside of the blower motor case which is inside of the car on the passengers side. You first must remove the under-dash panel on that side.
|
Thanks guys - appreciate your time.
|
To add to Doc's reply, it is very easy to get to; unlike the 124 body regulator.
|
Thanks alot. I just finished replacing it and you were right but those trim panels can be a real pain in the arse.
|
All times are GMT -4. The time now is 12:52 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website