PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   Torque settings for brake caliper bolts. Replacing rotors. (http://www.peachparts.com/shopforum/tech-help/44888-torque-settings-brake-caliper-bolts-replacing-rotors.html)

tmorales 08-24-2002 07:08 PM
Torque settings for brake caliper bolts. Replacing rotors.
 
I'm replacing rotors on my '97 E420 and would like to have an idea of what to torque the caliper carrier bolts to. Also, should I use Loctite on them?

1992300e 08-24-2002 09:06 PM
Brakes
 
Hi tmorales,

My cd, model 124 series, states "Replace self-locking bolt. Tightening torque 35 nm".

Hope this helps, based on my manual, looks to be the bolt going through the carrier.

Thanks,
Joel

RPM55 08-24-2002 09:51 PM
If the bolts have 19mm wrench size heads they torque to 80 ft. lbs..I would suggest that you clean the bolts and use medium strength (blue) loctite.

1992300e 08-25-2002 07:51 PM
thanks RPM55
 
I was concerned I might not have had the correct bolts.

Thanks,
Joel


All times are GMT -4. The time now is 04:08 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website