|
|
|
#1
|
|||
|
|||
1984 380 Se
Two questions: AC works fine...but no heat. Should I try to replace mono-valve before I proceed to items like heater core?
Cold start is fine. Hot start requires pumping of gas pedal. Is this possibly a relay or regulator problem? Thanks for your help!!! |
#2
|
|||
|
|||
MONOVALVE
I went through prior HEATER threads and found the advice on the MonoValve...it worked!!!! An easy repair.
Now, I am hoping that the Fuel Accumulator solves the next problem!! Thanks!! |
#3
|
|||
|
|||
hot start problem fixed!
Well.....the monovalve worked for the heat. AND,,,the fuel accumulator worked for the hot start problem!
What a boon this Shop Forum is! Now, I have to solve a engine cutting problem....guess I'll try the Overload Protection Relay...and the Fuel Pump Relay. Thanks to all the Senior members for their knowledge and help. |
#4
|
||||
|
||||
Your two for two! Nice going. I really like it when the resolution gets posted when the problem is solved. Thanks.
__________________
The Golden Rule 1984 300SD (bought new, sold it in 1988, bought it back 13 yrs. later) |
Bookmarks |
|
|