|
|
|
#1
|
|||
|
|||
Play in Gear Shifter
Often when I put the car in drive the trans does not engage. I have to move the shifter further down toward 3rd gear. How do I tighten up whatever needs to be tightened?
__________________
Earl 1993 190E 2.3 2000 Toyota 4x4 Tundra Last edited by ejsharp; 08-30-2002 at 10:35 PM. |
#2
|
|||
|
|||
Inpsect the shift link rod bushings underneath the car. There is one at each end of the rod. These dissintegrate over time giving that unwanted extra play in the gear selector.
__________________
Scott Diener 89 300E 93 300E 92 Volvo 740 Wagon aka "Mutt mover" |
#3
|
|||
|
|||
Thanks Scott-
I'll go out now and check it out.
__________________
Earl 1993 190E 2.3 2000 Toyota 4x4 Tundra |
#4
|
|||
|
|||
Yep... the bushings are gone. Looks like a fairly simple job. I'll try disconnecting the rod... pull it out and then insert the bushings.
Will order them from parts shop. Thanks.
__________________
Earl 1993 190E 2.3 2000 Toyota 4x4 Tundra |
Bookmarks |
|
|