Quick 190E shock question
I have an opportunity to buy 190E 16v shocks for the front of our '87 190E 2.3 Will they bolt right up? I can also get the original springs.
Will these easily replace the existing shock/ strut? |
Anybody know?
|
i think it should fit just fine but to be absolutely sure you should post your question on the http://azure.bbboy.net/190revolution board. it's completely dedicated to the 190 so i'm sure someone there will know the answer.
|
Thanks, good suggestion. I will do that.
Haasman |
different part #
1. I think they will fit but it won’t be the right height.
2. The part for the 16v version is 201 320 44 30, but the regular 2.3 like yours takes a 201 320 41 30. These are superseded number the old number also do not cross either. 3. To do the work, you will also need hex key and a special socket to toque them properly see this pages: http://www.hazet.de/eng/katalog/suche_3.asp?F=2593%2D19&H=100&U=230 Thai GI sends… |
Thanks Thai GI, I will check it out.
|
wrong size for the tool
1. Hey, sorry I got the wrong size for the tool it’s a 22mm not 19mm, look at this page:
http://www.hazet.de/eng/katalog/suche_3.asp?F=2593%2D22&H=100&U=230 2. Can’t really tell hua, just that the part numbers are different. Thai GI sends… |
That is a nice tool, though I suspect most folks get by without it.
|
All times are GMT -4. The time now is 12:29 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website