|
|
|
|
|
#1
09-05-2002, 05:00 PM
|
|||
|
|||
|
Instrument cluster pullers
I have used instrument cluster pullers very successfully on my 1998 E300D to change bulbs.
Now I have a 1999ML and a 2001 C320. Do the instrument clusters come out the same way, ie: can I use the same pullers as on the 98 E300? If not, how do you get to the instrument cluster bulbs on the 99 ML and the 2001 C320? Thank you....Richard (rsl007)
__________________
RSL007 1999 ML430 2001 C320 Sport 2000 SAAB 9-5 1998 E300DT 1998 C280sport 1991 300D 1991 350SDL 1982 300DT 1972 Porsche 911 Targa 
|
|
#2
09-05-2002, 05:37 PM
|
|||
|
|||
|
The ML instrument cluster is bolted in much like a BMW. The plastic trim must be removed first & then you will find the sheet-metal screws.
The W203 chassis still uses the 140-589-02-33-00 pulling hooks!
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator
|
|
#4
09-06-2002, 10:15 AM
|
||||
|
||||
|
Good to know...I thought about going after the ML cluster with those hooks in the same manner as in my other two MB vehicles
 ...what a mistake that would be!
__________________
2009 ML350 (106K) - Family vehicle 2001 CLK430 Cabriolet (80K) - Wife's car 2005 BMW 645CI (138K) - My daily driver 2016 Mustang (32K) - Daughter's car
|
 |
| Bookmarks |
|
|
Linear Mode
