Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 09-05-2002, 07:04 PM
Registered User
 
Join Date: Oct 1999
Posts: 4
Are seat backs interchangeable?

Are the driver and passenger seatbacks on a 2000 E320 interchangeable??? (The drivers side seatback cover was replaced under warranty, but since then, it really isn't as comfortable as before.)

Reply With Quote
  #2  
Old 09-06-2002, 12:52 PM
Moderator
 
Join Date: Mar 1999
Location: Tucker, Ga USA
Posts: 12,153
NO, they are left or rt only>
__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator
Reply With Quote
  #3  
Old 09-06-2002, 01:42 PM
Registered User
 
Join Date: Oct 1999
Posts: 4
Seat Backs

Thanks for the quick reply. Here's my problem:

2000 E 320. 2 1/2 years of wear resulted in the stain wearing off the leather seat back and a white streak about 1/4" by 5" up the center seam of the seat back. The dealer replaced the seat back cover under warranty last week

The service advisor and I were dissatisfied with the replacement. The leather was buckling and bunching in the corners. He ordered a replacement cover and he'll re-do the work. I'm driving the car until the cover comes in. Now I'm noticing that the lower portion of the seat back is very comfortable. I suspect the original contour of the back was changed when it was recovered.

My plan was to have them do the best they can with the recover, but then switch the driver and passenger seatbacks. That would give me one "factory" seatback, with the original contour and original comfort. If the backs (or seats) aren't interchangeable, than I'm stuck with however the recover turns out.

The tech is replacing the cover manually, and I can't see how the most careful tech can maintain the original contour and firmness when recovering the aaeatback by hand, much less avoid the buckling of the cover that was evident. If the the next recover is uncomfortable and the backs can't be switched, am I reasonable in asking the dealer for a new seatback?

Thanks

Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 05:28 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page