|
|
|
#1
|
|||
|
|||
C230 Super Charger
I was wondering about maintenance on the C230 super charger. How is it oiled, because I have heard of super chargers have their case sealed, and there is special oil for super chargers. Is that the same with the C230 super charger? Also I was wondering who makes the super charger for the C230?
|
#2
|
||||
|
||||
I could be wrong, but here is what I understand about the Eaton M62 supercharger, as mounted on the M111 2.3L DOHC engine:
1. The unit is maintenance free and sealed for "life." 2. The unit may or may not be rebuildable depending on what tech you talk to. 3. It is a Roots style unit, and the "turbines" mesh together to form the compression chamber. This means that eventually, the turbines will wear and cause loss of compression. But, in certain models (including the M62) they coat the turbines with a low friction compound to reduce this wear. Should add considerable life to the unit. 4. The main wear point will be the bearing set for the main pulley. 5. Pay attention to belt wear. A snapped belt is NOT good. I have a friend with a 1999 C230K and the belt was cracking and worn at 120,000 kilometers, so they seem to last a few years at least.
__________________
John Shellenberg 1998 C230 "Black Betty" 240K http://img31.exs.cx/img31/4050/tophat6.gif |
#3
|
|||
|
|||
Have seen several "kompressor" supercharger failures.
The supercharger is a "Roots" type blower made by EATON & uses synthetic oil MB part number 000-989-62-01. Can be $$$$$$
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
Bookmarks |
|
|