My driver side window switch appears to be stuck and will not roll up the window but will only go down. I need to get access to the rocker switch but can't seem to lift the wood panel up after removing the ring around the shift knob assembly. Am I missing something? Is the panel mounted?
Would appreciate any assistance. Thanks, Scott '90 560SEC |
Open the ash tray
Remove the container remove the two screws that hold assmbly in and pull it out Lift the coin pocket from the front and roll it out Slide the wood trim forward about .5 inch and lift out. |
Thanks Corky. I found a bad switch. That was a piece of cake.
Scott |
All times are GMT -4. The time now is 09:33 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website