fuel injectors
With all injectors removed,what should i use to clean them? 1989 420sel.
|
ANYBODY!
|
The best cleaner is toluene (if you can find some)
Do not use any abrasive material jackD |
If you have already taken the time to remove them, why not replace them. Your own labor is the most expensive portion of this job. Then you know you are good for another 12+ years!!
|
If you search the internet, there are places where you can mail the injectors where they'll ultrasonically clean them in the proper solution, backflush, flowtest and balance them for about $25 per injector.
|
I've heard of people spraying carb cleaner into the air intake to clean the injectors. Any problems with this?
|
All times are GMT -4. The time now is 11:44 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website