My 1987 260E has a burnt valve and I want to remove the head and have a valve job done. I can't find a shop manual. Does anyone know where I can get one? What size are those metric star bolts holding the head on?
|
You can order the 201 (190E) CD rom from us and just use the info on the 103 engine. They are the same in the 260 E and in the 190E 2.6. The 124 CD will be out in about 2 months.
------------------ Benzmac: ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
PS, I just looked at the CD and it has everything you will need. The size of the bolts is T12 12point spline wrench needed.
We can get you this as well on the partshop at the bottom of the page, You will need the short one and the long for ease of use! ------------------ Benzmac: ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
All times are GMT -4. The time now is 08:11 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website