PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   ml 55 speedo..... (http://www.peachparts.com/shopforum/tech-help/46939-ml-55-speedo.html)

carlos 09-25-2002 11:05 AM

ml 55 speedo.....
 
I currently own a 1999 ML 430, and would like to upgrade the boring black speedo, for the ML55 white faced speedo... First of all, has anyone done this, and secondly how difficult is it... I've already upgraded my horn to a ML55 horn, sounds fabulous compared to the ridiculous sounding "beep..beep" horn from the 430...any help would be greatly appreciated....thanks...

G-Benz 09-25-2002 01:15 PM

www.************************ has an assortment of interior goodies for the ML, including the white gauge face kit. They include the tool to remove the needles as well.

I haven't taken mine out yet (too new for me, has to be out of warranty before I start dismantling stuff), but I've read in another post that unlike the "pull-out" types, there are six or so screws to remove before getting the cluster out.

carlos 09-26-2002 05:37 AM

Thanks G Benz
 
Thanks for replying to my post.... I have seen the white faced gauge on performance parts. com.... not bad.....do you think it is easier to perform that application than to ml 55 it.....

G-Benz 09-26-2002 10:15 AM

Re: Thanks G Benz
 
Quote:

Originally posted by carlos
Thanks for replying to my post.... I have seen the white faced gauge on performance parts. com.... not bad.....do you think it is easier to perform that application than to ml 55 it.....
A lot cheaper...but if you are so gung-ho on making yours look like one, you are better off hunting down a REAL ML55!!! Or buy a later model ML Sport, as the body cladding more closely resembles the ML55.

Saw a 2000 ML55 in the local MB used lot for $42K a few months ago...;)

Gilly 09-26-2002 10:15 AM

I have helped one of the salesmen do this to his E320 Coupe. Ended up real nice. Big problem is getting the needles back on correctly, he ended up getting the speedo recalibrated, as he has a bit of a lead foot and wanted it to be very accurate. I would check into doing all of the gauges. This salesman was going to do just the speedo too, looked like crap that way. Problem would be that the ML55 gauges have the chrome trim around them, which is cool looking, don't know if you could buy just that part.

Gilly


All times are GMT -4. The time now is 07:52 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website