|
|
|
#1
|
|||
|
|||
To narrow down my problems (in relation to my previous posts), I figured out that my hesitation/acceleration problem only occurs when I press on the accelerator to speed up. I have no problems if I am holding a steady speed,and the problem is more pronounced at highway speeds. I put in new fuel filters today, replaced all bad vacuum lines and reconected my EGR valve, but I still have this problem when I push the accelerator way down. Otherwise the car runs fine. What would be causing this? Fuel pump? Injectors? Water or contamination in the gas tank? Thanks for the help.
Greg '83 300D 158K |
#2
|
|||
|
|||
One other thing - I did notice one of the rubber fuel lines connecting the injectors is seeping fuel. Would this cause and acceleration hesitation problem? I'll replace it tomorrow to elliminate this possibility. Thanks
|
#3
|
|||
|
|||
The other thing that can cause this is no turbo boost to the anaroid valve. I have seen this a number of times.
------------------ Benzmac: ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Hesitation again ('90 300SE) | fahrgewehr2 | Tech Help | 1 | 11-12-2003 04:40 PM |
Hesitation Problem Solved (hopefully) | Mike G | Tech Help | 2 | 11-07-2003 11:26 AM |
Any suggestions on hesitation from standstill? | Ron Brooks | Tech Help | 4 | 09-14-2003 11:48 PM |
Any suggestions on hesitation problem? | Ron Brooks | Off-Topic Discussion | 0 | 09-14-2003 12:20 PM |
hesitation between 5500-7000 rpm | Joreto | Tech Help | 0 | 05-17-2002 03:24 PM |