MB Gods... Help?
I took my 190e 2.3 for a test drive tonight.. about 20 miles. This is the first drive of more than 1/10 of a mile in 6 months. I have been rebuilding and fixing a ton of problems. The car is not shifting correctly. It seems to be starting out in 1st instead of second and does not shift to 3rd unless I let off the gas a bit. It will redline itself and still not shift from 2 to 3. Same is happenign from 3 to 4 only it barely stays in 4 at all.. just down shifts to 3.
Is there a vacuum control for the transmission? I only rebuilt the engine and I do not recall even touching the tranny. There are other issues with the car, but I will hammer through those myself. Thanks guys. |
Seems like I have found the issue myself.. the control pressure cable is out of adjustment ( I do remember screwing around with this ).
|
I hope so - your symptoms are almost identical to those on my 190E when the autobox quit. Needed a new (reconditioned) one.
|
.
|
Hey guys! It was the control pressure cable! I made an adjustment and all is almost perfect now. I still need to fine tune it a tad, but it is shifting the way it did when I got the car.
|
All times are GMT -4. The time now is 07:35 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website