Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 10-15-2002, 01:19 PM
Oliverp's Avatar
Registered User
 
Join Date: Aug 2000
Location: Toronto, Canada
Posts: 452
420SEL High tickover when warm

Just one more question!

When cold, the car idles in park or neutral at about 750-850rpm, and engagement into drive or reverse is smooth.

When the car reaches operating temperature, it idles in park or neutral at 1500rpm, and engagement into drive or reverse creates a big 'clunk', and once drive or reverse is engaged, it drops back down to about 750-850rpm.

I'm getting the valve seals, guides and the head done over the next month or so. Will this solve the problem, or is it an idling problem?

Thanks again everyone

__________________
Oliver
Reply With Quote
  #2  
Old 10-15-2002, 07:26 PM
Moderator
 
Join Date: Dec 2001
Location: Southern California, U.S.A.
Posts: 8,538
When you put your gear selector into drive or reverse and you hear or feel a big clunk, it's probably work out rubber flex discs on your driveshaft, or possible a worn out center support bearing on the driveshaft.

It could also be broken differential mounts, but my money is on worn out flex discs.

You need to get this looked at right away. If it's a worn out flex disc, and it fails when your on the road, you could be looking at some expensive damage.
__________________
Paul S.

2001 E430, Bourdeaux Red, Oyster interior.
79,200 miles.

1973 280SE 4.5, 170,000 miles. 568 Signal Red, Black MB Tex. "The Red Baron".
Reply With Quote
  #3  
Old 10-17-2002, 09:31 AM
moedip
Guest
 
Posts: n/a
Other than the clunking when tranny put in gear - my 560sel (1988) has just started the same thing. Idle is smooth and about 850RPM when cold and after about 15 minutes it starts to climb to 1500RPM at idle and stays there. However, when I put it in gear, when warm and idling at 1500RPM, it smoothly goes down to 650RPM. When I take it out of gear when warm, it takes about 3-5 seconds and slowly goes back to 1500RPM. Other than that the car runs good. Any one with ideas????
Reply With Quote
  #4  
Old 10-17-2002, 10:13 AM
dpetryk's Avatar
Electrons can do anything
 
Join Date: Sep 2001
Location: Houston, Texas
Posts: 1,072
Its probably the idle control valve. It has been discussed to death in many threads. Do a search.

__________________
I got too many cars!! Insurance eats me alive. Dave

78 Corvette Stingray - 3k
82 242 Turbo Volvo - Manual - 270k
86 300e 5 speed manual - 210k
87 420sel - 240k
89 560sl - 78k
91 420sel - 205k
91 560sel - 85k
94 GMC Suburban - 90k
97 Harley Davidson Heritage Softail - 25k
00 GMC Silverado 1 ton 30k
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 02:00 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page