|
|
|
#1
|
|||
|
|||
W124 windshield wiper adjustment
My 1992 300D mono-wiper hits the rubber seal on the right side of the windshield. It has actually ripped the rubber seal and causes the wiper to do a terrible job.
I have read an artilce at the attached link concerning lubricating the mechanism but don't know if that will fix my problem... http://business.baylor.edu/Richard_Easley/mercedes/mercedes.html Looking for suggestions.. Wayne
__________________
Wayne Jockers 1992 300D |
#2
|
||||
|
||||
adjustment
Not sure which "SeaL" you're talking about. If you mean its hitting at the vertical side , the blade is probably too long. If its hitting at the horizontal edge, I think you can remove the entire wiper assy and simply move it over a few gear teeth.
|
#3
|
|||
|
|||
the wiper is only hitting on the passenger side
and its hitting the windshield ruber seal....
__________________
Wayne Jockers 1992 300D |
#4
|
||||
|
||||
Remove and move a few teeth over
That ought to do it
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|