PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   85 190E turn signals gone nuts! (http://www.peachparts.com/shopforum/tech-help/4936-85-190e-turn-signals-gone-nuts.html)

alwong 08-04-1999 10:07 PM

Help.....

My turn signals seems to have a mind of their
own. On hot days, it just refuses to work.

All other electricals appears to be fine. The hazard lights also work fine.

Any ideas?

Al Wong
83 300sd
85 190E

MB Medic 08-05-1999 12:44 AM

The first thing to do is replace the fuse, it might look good to the naked eye but replace it anyway, they can corrode and/or "burn" on the ends. The fuse for the turn signals is different than the fuse for the hazard lights.
let us know if this helps.


------------------
MB Medic
14 year MB tech
7 year shop foreman @ independent MB/Volvo shop

alwong 08-05-1999 09:45 AM

Thanks MB Medic...

The turn signals worked fine this morning (6:00AM) when I left for work. I parked the car in the ususal spot out in the sun, and when I wnet out around 9:00 to buy some fuses, it is no longer working. I picked up the fuses replaced ALL of them, and still no dice with the turn signals.

What is my next step?

Al Wong
83 300SD
85 190E

Benzmac 08-05-1999 09:50 PM

You may want to replace the flasher unit.

------------------
Benzmac:
ASE CERTIFIED MASTER AUTO TECHNICIAN
SERVICE MANAGER FOR 14 BAY FACILITY
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM



alwong 08-05-1999 10:24 PM

Benzmac,

Believe it or not, but I can not find the flasher unit. That was the first thing I thought of, but after 45 minutes or so under the dash, I figured there must not be a flasher on the car.

Where is the flasher unit?

Al Wong

[This message has been edited by Webmaster (edited 08-06-1999).]

Corky 08-05-1999 10:48 PM

It is in the fuse box in the last slot closest to the firewall. It does not look like a flasher. More like a large relay. It has a SAE number on it. Location number in fuse box is R1 Componet is designated N10
Good Luck
PS a defective hazard switch can also cause the turnsignals not to work

IFIXMB 08-05-1999 10:53 PM

Try turning the red hazard switch in the center console on, then off again. If this switch is halfway between on and off, the turn signals won't work.

------------------
Mercedes Star Technician,
Mercedes Master Guild Technician, ASE Master Tech. 18 years exp.

Bill Wood 08-06-1999 12:55 PM

The Shop Forum is intended to be a place where anyone can ask questions about their Mercedes and get an answer from a professional technician. Please keep it at that.

We will not tolerate ethnic, racial or off color comments. We have edited or eliminated all posts in this thread that could be offensive.

------------------
Bill Wood - Webmaster
MercedesShop.com, LLC




All times are GMT -4. The time now is 10:37 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website