Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 11-11-2002, 01:48 PM
Registered User
 
Join Date: Oct 2002
Location: New England
Posts: 68
EGR Location

I Read a past thread on how to clean the EGR tube with a speedo cable. I hooked the car up to OBDII and it read"low egr flow" Where is the location of the EGR valve on my 94 C280?

Thanks,
Reply With Quote
  #2  
Old 11-11-2002, 06:06 PM
Moderator
 
Join Date: Mar 1999
Location: Tucker, Ga USA
Posts: 12,153
Under the hood, on the exhaust manifold at the very back of the engine.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator
Reply With Quote
  #3  
Old 06-25-2003, 02:18 PM
CHOTAY
Guest
 
Posts: n/a
I have 1990 300E (3.0). Is it possible for you to give me link which explains how to read codes? Thanks
Reply With Quote
  #4  
Old 06-25-2003, 02:47 PM
Registered User
 
Join Date: Oct 2002
Location: New England
Posts: 68
I used a simple Snap-On diagnostic computer that my buddy uses in his repair-shop, we used the OBD II interface to hook it up to the Benz. No need to decipher codes this way as the codes come up 'readable' on the screen along with the corresponding trouble code itself. The machine I used is fairly basic /low end Snap-On, I would think most auto-shops have one. As far as reading codes off of the car and deciphering them, I dont know of a link, but I'm willing to bet that there is one somewhere.

Hope that helps a little,

-M
Reply With Quote
  #5  
Old 06-25-2003, 06:11 PM
sixto's Avatar
smoke gets in your eyes
 
Join Date: Jun 2000
Location: SF Bay Area
Posts: 19,744
Standardized OBD wasn't around in 1990. Certainly not OBD II.

I think you can count LED flashes in a 1990 but I don't know how to do that or how to interpret codes.

Sixto
95 S420
91 300SE
87 300SDL
83 300SD
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 11:22 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page