Hello,
(84 300 SD, California version) Im having trouble with an engine grouding problem. The temperature gauge keeps fluctuating, but when I take a wire from the engine block connected to the negative battery terminal, the temperature reads correctly and all fluctuations in gage stop. The problem is trying to isolate whats causing the engine block not to ground properly? Any ideas where to start? I tried disconnecting almost all the engine sensors and that didnt help. When I connect the wire it actually is producing a small spark on the engine block. Thanks in advance. |
well, i found the problem on my own..loose bolt for the ground connector from the starter to the block.
thanks anyway |
Good troubleshooting! Sometimes those can be hard to find.
------------------ Benzmac: ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
All times are GMT -4. The time now is 04:26 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website