|
|
|
|
|
#1
12-10-2002, 11:01 AM
|
|||
|
|||
|
Passenger Air Bag
I have a rattle behind the cover of the passenger air bag, I'm assuming it probably the screws on the air bag mounting. How do you remove the cover to check the screws?
Thanks, timreid
__________________
timreid 1992 400E euro lights 500E sway bars 210 16in wheels 
|
|
#2
12-10-2002, 02:15 PM
|
|||
|
|||
|
drop the lower dash on the r/h side and look up.
 Joe
__________________
Project Smoker, '87 603 powered wagon Hauler, 96 CTD can you say torque? Toy 73 Cougar xr7 convertible Acme Automotive Inc. Raleigh NC 919-881-0364
|
|
#3
12-10-2002, 04:12 PM
|
|||
|
|||
|
pass air bag
Remove the lower panel, does that also include removing the lower front facia panel to gain acces to the air bag mounting screws? I've never removed the passenger dash panels, what to do it right. Thank You, timreid
__________________
timreid 1992 400E euro lights 500E sway bars 210 16in wheels Last edited by timreid; 12-10-2002 at 04:23 PM.
|
|
#4
12-10-2002, 04:31 PM
|
|||
|
|||
|
If you are trying to remove the airbag, I would first recommend that you disconnect the battery. You don't want that thing to accidentally deploy while you're attempting to remove it. Next, look up under the kick panel on the passenger side. You will see a deep vertical hole. Use a 10mm socket w/extention to remove this bolt and the airbag w/cover will then slide out of the dash.
|
|
#5
12-10-2002, 04:39 PM
|
|||
|
|||
|
RM92400E, Thanks for the reminder to disconnect the battery. I have a rattle behind behind the air bag cover, and I assuming that a air bag monting screw is lose, and I just not sure of the best way to get to those screws behind the air bag cover, Thanks timreid
__________________
timreid 1992 400E euro lights 500E sway bars 210 16in wheels
|
|
#6
12-10-2002, 04:46 PM
|
|||
|
|||
|
timreid,
There really are no air bag mounting screws behind the airbag. There are, however, screws that can be adjusted inward or outward that regulate how far the airbag recesses into the dash. There are also some airbag bracket screws back there that could be loose as well. Have you checked the 10MM retaining bolt to insure that is tight ? RM92400E
|
|
#7
12-10-2002, 06:10 PM
|
|||
|
|||
|
RM92400E
I'll check that 10mm bolt tomorrow, if it's tight, then all I have to do is loosen that bolt to remove the air bag and will this also give me access to the mounting bracket? Thanks again, timreid
__________________
timreid 1992 400E euro lights 500E sway bars 210 16in wheels
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
