Parts Catalog Accessories Catalog Tech Info Tech Forums
  Search our site:    
 Cart  | Project List | Order Status | Help    

Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

LinkBack Thread Tools Display Modes
Old 12-14-2002, 01:15 PM
Registered User
Join Date: Feb 2002
Location: Orlando, FL
Posts: 788
126 body paneling

I need to get the rear paneling off my W126. The service manual says to unscrew the nut under the weatherstripping, which I did, and then it says to "unclip" the top from rear to front and then unclip the bottom from front to rear. That's all it says. The paneling comes out a little when I unscrewed the nut, and when I pull on the top, it doesn't want to let go. I could pull harder, but I don't want to break anything!!! I could also use something to pry it, but then I am even more afraid of breaking something or damaging something, like the metal underneath. Do I just simply need to pull harder or is there something I am not doing correctly?
'86 420SE Euro
904 Midnight Blue, Gray Velour
Dad bought it new, now I own it.

"A Mercedes-Benz is like a fine wine, it only gets better with age."
Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 12:19 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page