still no ignition
1992 500sl What pin in test connector at EZL will be hot with key in run position? Is there a way to test the crankshaft p[osition sensor?
|
Crank sensor
Hi the crank sensor can be tested w/ohm test but the best way, that will also test pins on flywheel is w/waveform viewer. With a waveform viewer you unplug sensor and hook straight to it. I use a Snap-on Vantage. Some Digital Ohm meters will work. Hope this helps I'm working on a no spark problem w/91 500 right now that's giving me fits because every signal is there at the ignition module, but I cannot get codes from the ECU so I do notthink these two are talking to each other, Well good luck:confused:
|
All times are GMT -4. The time now is 03:11 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website