Idle speed control?
Hello,
My 1972 280se 4.5 idle speed is to high. How can I adjust the speed? Please could you tell me the exact procedure on doing that? Thank You. cK __________________ |
Simple answer: reduce the air intake.
If the air screw is bottomed then the air is coming from somewhere else. Give a D-jet air and fuel will follow. The common place for additional air on that model would be a defective t-stat in the aux air valve (replaced as a unit - tall aluminum tower with two hoses at center front of engine). After that I would be sure the throttle goes closed and lastly no vacuum leaks. |
The air screw is also at the top front of the engine. Its about a half inch in diameter with a spring around the body.
|
All times are GMT -4. The time now is 07:54 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website