PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Tech Help (http://www.peachparts.com/shopforum/tech-help/)
-   -   fuel distributor timing for an 83 240D (http://www.peachparts.com/shopforum/tech-help/52699-fuel-distributor-timing-83-240d.html)

autowerks 12-17-2002 07:35 PM

fuel distributor timing for an 83 240D
 
How do you set the timing? Is there a tool used to hold the gear from turning?

engatwork 12-17-2002 08:10 PM

I'm not exactly sure I am understanding your question. Do a search on "start of delivery" and them come back and ask again. Are you installing a fuel injection pump that is out of the engine or are you checking the fuel injection pump "timing"?
There is no special tool for this application unless you consider the "drip tube" a special tube.

autowerks 12-18-2002 08:05 AM

What I have is a 76 (240 D) manual, I installed an 83 (240 D) I used a fuel distributor from the 76, now it is running to rich. How do I set the timing?

stevebfl 12-18-2002 08:20 AM

The inj pump on a 76 240D was pneumatically controlled. Did you use the manifolds from the early motor also? Is the vacuum line hooked up at the top/back of the pump?

autowerks 12-18-2002 09:11 AM

I change over all fuel inj, from a 76 to a 83 manifold . Relocated the oil filter houseing. car runs good, starts fine. All that Im looking for is the proceeder to set timing (in timing) Walk me though as if the in pump was in my hand and the engine had been turn over with pump out. I hope this will help you understand what Im trying to get. Does this sound like something that you can help with? PLEASE.....


All times are GMT -4. The time now is 09:06 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website