|
|
|
#1
|
|||
|
|||
I have a 99 SL 600 I'm fixing. THe suspension was ripped out from under it. I Repaired it meticulously but the hydralic suspension in the front won't work. The rear works fine. I even took off the fitting from the top of the shock and filled with mercedes fluid. All the lines are connected correctly and the wiring routed correctly. I bled the valve under the driver side by the sway bar too. Some air came out but then no air, just fuid. What is the trick to make it work ?. Oh , and the switch on the left of the dash that controls it seems to operate correctly too, thank you, Will T.
|
#2
|
|||
|
|||
Will, What do you mean by won't work? I need an in depth description of what the problem is. Is the front sagging?
------------------ Benzmac: 1987 16V ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
300 TD - Strange oil consumption or Suspension issue | BIGRED | Diesel Discussion | 2 | 10-07-2003 08:32 PM |
300 TD - Strange oil consumption or Suspension issue | BIGRED | Tech Help | 0 | 10-07-2003 11:25 AM |
560 Rear Suspension | Hoopster | Tech Help | 3 | 07-17-2002 11:42 AM |
Suspension Differences between CLK and 300CE?? | Ashman | Tech Help | 4 | 10-20-2000 04:19 PM |
self leveling suspension question | Wael El-Dasher | Mercedes-Benz Performance Paddock | 8 | 03-19-2000 11:28 AM |