Replacing domelight on 190E?
 

It isn't obvoius to me how to replace the reading lamp/dome light bulbs in my '92 190E...embarassing question, mystery release tab must be somewhere...

Thanks!

Til
til@tilluchau.net

replacing the dome light is easy
there are in fact 2 bulbs-one specifically for reading and another for lighting up the interior of the car.

if i remember correcty,you have to remove the plastic assembly that holds the bulbs within. once the assembly is out,it is just a question of replacing the faulty bulbs-get the correct ones though.:)

I just had mine out...there are 2 tabes on the right side near each corner, you can pull down on that side to get a gap then use a thin flat item to depress the tabs or...when I 1st removed the unit, I pulled on the right side and the tabs popped off. I could then reinstall them and it popped back in place...as mentioned, there are 2 bubls in the unit. Should be obvious how to change them once the unit is removed.....hope that helps

Thanks, mystery tabs revealed!

--Til