|
|
|
#1
|
|||
|
|||
Inner door panels 300E
How do the inner front door panels come off on the 300E? In particular, I need to remove the map pocket of the right side door on my 300E. Just how did MB make these to sort of snap together?
Thanks, JB |
#2
|
|||
|
|||
removing the door panel is a pain and a bear to
put on. breaking the pins or clips is 100 percent sure. so weigh whether it is worth what your trying to fix. |
#3
|
||||
|
||||
Take a look at the DIY'er section on check strap replacement. I feel pretty certain it is the same way.
__________________
Jim |
#4
|
|||
|
|||
Nah you won't break it as long as you're careful. Take your time, don't use brute force. The DIY article on door check strap replacement is a good guide.
|
#5
|
|||
|
|||
I agree with speedy. Although it is a major PITA, they can be removed and replaced without breaking anything, but you must know how everything comes apart. This is a really good job for which to follow the service manual info.
Good luck, |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|