Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Closed Thread
 
LinkBack Thread Tools Display Modes
  #1  
Old 09-16-1999, 03:10 PM
joebeetle
Guest
 
Posts: n/a
I have a 1986 300E. When I bought it, the hose which feeds the filter box was badly mangled. I finally got around to replacing it and I notice that the new hose has a slot in it to put an air temp or flow sensor into. The problem is, I can find no wires or connectors which would plug into this slot. Did the 1986 300E have one of these sensors? I suppose it's possible that I was sold an intake hose which was meant for a later model with the sensor.

Thanks,

Joe Slemp
  #2  
Old 09-16-1999, 05:30 PM
Senior Member
 
Join Date: Apr 1999
Location: Walnut,CA,USA
Posts: 554
1986 300E don't have air intake temp sensor
you should find a plug to cover the hole....
ask dealer to find one for you.

------------------
MB STARS Master Guild Technician,12 years MB tech
5 years independent shop owner
  #3  
Old 09-16-1999, 10:43 PM
Registered User
 
Join Date: Mar 1999
Location: Suwanee, GA, USA
Posts: 4,712
If you don't have the plug, don't worry. The hole is down stream of the air filter and won't hurt anything.

------------------
Benzmac:
1987 16V
ASE CERTIFIED MASTER AUTO TECHNICIAN
SERVICE MANAGER FOR 14 BAY FACILITY
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM

Closed Thread

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Oil in the air intake? Bad turbo seals? Hatterasguy Diesel Discussion 8 10-18-2004 10:27 PM
Cold air intake question. mike690003 Performance Paddock 50 12-22-2003 10:15 AM
C280 EGR Tube Clean Out -Through the Air Intake sgerus Tech Help 9 05-23-2003 01:59 PM
Blowby and intake air rcmktg Tech Help 1 12-16-2002 05:11 PM
124 300D fender vent air intake Grdenko Diesel Discussion 6 10-22-2002 05:04 PM



All times are GMT -4. The time now is 08:56 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page