When the drivers side power seat is adjusted for me (pretty much bottomed out, pretty far back) it tilts back about 3/4" during acceleration, and rocks forward during braking. It also seems to sit lower on the inboard side. The seat doesn't rock when adjusted for my wife (about middle height, middle of front back range), and seems to be level. Is this likely to be a mechanism problem, or a problem with the bolts holding the seat to the floor.
Also, is there an easy way to get more lateral support from the seats, or do they need to be replaced with something else? Thanks for any suggestions. ------------------ JCE 87 300E 55,000 miles Shadow Silver |
My 88 300e does the same thing.
|
It probably has loose bolts that connect the seat back to the bottom. Or the main attachment bolts are loose.
------------------ Benzmac: 1987 16V ASE CERTIFIED MASTER AUTO TECHNICIAN SERVICE MANAGER FOR 14 BAY FACILITY MERCEDES SPECIALIST 8 YRS PARTNER IN MERCEDESSHOP.COM |
My bottom seat cushion has too much "sag" when I sit on it. I suspect broken springs. Is this a repair that can be done by a good tech or does the cost get prohibitive (i.e. should I just live with having to keep my seat bottom cushion inclined all the way "down" to keep the front in the right position?
Is this a good weekend project for a novice or are there special upholstering skills needed? In other words, I don't want to break (or tear) something that's just worn. Can individual springs in the seat cushions be replaced? All of my seats are like this to some degree. Thanks in advance, ------------------ Robert W. Roe 1984 300SD 165,745 miles |
All times are GMT -4. The time now is 06:50 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website