Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Technical Information and Support > Tech Help

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 01-08-2003, 09:02 PM
Registered User
 
Join Date: Jul 2000
Posts: 97
126 Power Window

85 380SE - the driver's side window makes a thumping noise when it's raised and a loud banging noise when it reaches the top of the track. The motor doesn't seem to stop when it's raised all the way. Is this the motor or is it off track? It seems to be slipping on the way up but it lowers with no problem.
Reply With Quote
  #2  
Old 01-08-2003, 10:18 PM
ILUVMILS's Avatar
Senior Member
 
Join Date: Sep 2002
Location: New Jersey, U.S.A.
Posts: 2,461
It sounds like the regulator is missing a few teeth. The best way to tell is to take it apart and have a look at it. The reason it goes down smoothly is that it's spring loaded to help it lower quickly. On the way up, the motor has to overcome the spring tension. I'll bet the last couple of teeth on the regulator are worn out. Make sure you look at the gear on the motor as well. Good luck
Reply With Quote
  #3  
Old 01-09-2003, 11:14 AM
Registered User
 
Join Date: Jul 2000
Posts: 97
Thanks for the response? What would a regulator cost to replace - any idea?
Reply With Quote
  #4  
Old 01-09-2003, 12:29 PM
hedpe's Avatar
Registered User
 
Join Date: Oct 2001
Posts: 507
they're not too expensive, around $90 if you don't need the motor with it

you can order one from fastlane for ~$85 or so
__________________
Own:
2013 C300 4matic
2009 C300 4matic

Owned:
2001 E320 Sport
1992 500E
1989 300SEL
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 03:07 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2011 Pelican Parts - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page